policy enable

Syntax

policy enable

undo policy enable

View

IPsec policy view

Default level

2: System level

Parameters

None

Description

Used the policy enable command to enable the IPsec policy.

Use the undo policy enable command to disable the IPsec policy.

By default, the IPsec policy is enabled.

This command is supported only in FIPS mode.

If the IPsec policy is not enabled for the IKE peer, the peer cannot take part in the IKE negotiation.

Related commands: ipsec policy (system view).

Examples

# Enable the IPsec policy with the name policy1 and sequence number 100.

<Sysname> system-view
[Sysname] ipsec policy policy1 100 isakmp
[Sysname-ipsec-policy-isakmp-policy1-100] policy enable