connection-name

Syntax

connection-name name

undo connection-name

View

IPsec policy view

Default level

2: System level

Parameters

name: IPsec connection name, a case-insensitive string of 1 to 32 characters.

Description

Use the connection-name command to configure an IPsec connection name. This name functions only as a description of the IPsec policy.

Use the undo connection-name command to restore the default.

By default, no IPsec connection name is configured.

This command is supported only in FIPS mode.

Example

# Set IPsec connection name to aaa.

<Sysname> system-view
[Sysname] ipsec policy policy1 1 isakmp
[Sysname-ipsec-policy-isakmp-policy1-1] connection-name aaa