user-profile enable

Syntax

user-profile profile-name enable

undo user-profile profile-name enable

View

System view

Default level

2: System level

Parameters

profile-name: Specifies a user profile name, a case-sensitive string of 1 to 31 characters. It can only contain English letters, digits, and underlines, and it must start with an English letter. The user profile must already exist.

Description

Use user-profile enable to enable a user profile that has been created. If the user profile does not exist, the command fails. Only enabled user profiles can be applied to authenticated users.

Use undo user-profile enable to disable the specified user profile. Disabling a user profile logs out users that are using the user profile. To edit or remove the configurations in a user profile, disable the user profile first.

By default, a created user profile is disabled.

Examples

# Enable user profile a123.

<Sysname> system-view
[Sysname] user-profile a123 enable