display ipv6 pim bsr-info
Use display ipv6 pim bsr-info to display IPv6 PIM BSR information.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] bsr-info
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays IPv6 PIM BSR information on the public network.
Examples
# Display IPv6 PIM BSR information on the public network.
<Sysname> display ipv6 pim bsr-info Scope: non-scoped State: Accept Preferred Bootstrap timer: 00:01:44 Elected BSR address: 12:12::1 Priority: 64 Hash mask length: 126 Uptime: 00:21:56 Scope: 5 State: Accept Any Scope-zone expiry timer: 00:21:12 Scope: 6 State: Elected Bootstrap timer: 00:00:26 Elected BSR address: 17:11::1 Priority: 64 Hash mask length: 126 Uptime: 02:53:37 Candidate BSR address: 17:11::1 Priority: 64 Hash mask length: 126 Scope: 7 State: Candidate Bootstrap timer: 00:01:56 Elected BSR address: 61:37::1 Priority: 64 Hash mask length: 126 Uptime: 02:53:32 Candidate BSR address: 17:12::1 Priority: 64 Hash mask length: 126 Scope: 8 State: Pending Bootstrap timer: 00:00:07 Candidate BSR address: 17:13::1 Priority: 64 Hash mask length: 126
Table 117: Command output
Field | Description |
---|---|
Bootstrap timer | Aging timer for the BSR. |
Scope-zone expiry timer | Aging timer for the scoped zone. |
Elected BSR address | Address of the elected BSR. |
Candidate BSR address | Address of the C-BSR. |
Priority | BSR priority. |
Uptime | Length of time the BSR has been up. |