mld startup-query-interval
Use mld startup-query-interval to set the MLD startup query interval on an interface.
Use undo mld startup-query-interval to restore the default.
Syntax
mld startup-query-interval interval
undo mld startup-query-interval
Default
The MLD startup query interval equals one quarter of the MLD general query interval.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an MLD startup query interval in the range of 1 to 31744 seconds.
Usage guidelines
You can set the MLD startup query interval for an interface in interface view or globally for all interfaces in MLD view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the MLD startup query interval to 100 seconds on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] mld startup-query-interval 100
Related commands
startup-query-interval (MLD view)