mld query-interval
Use mld query-interval to set the MLD general query interval on an interface.
Use undo mld query-interval to restore the default.
Syntax
mld query-interval interval
undo mld query-interval
Default
The MLD general query interval is 125 seconds.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an MLD general interval in the range of 1 to 31744 seconds.
Usage guidelines
You can set the MLD general interval for an interface in interface view or globally for all interfaces in MLD view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the MLD general query interval to 60 seconds on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] mld query-interval 60
Related commands
query-interval (MLD view)