mld other-querier-present-timeout
Use mld other-querier-present-timeout to set the MLD other querier present timer on an interface.
Use undo mld other-querier-present-timeout to restore the default.
Syntax
mld other-querier-present-timeout time
undo mld other-querier-present-timeout
Default
The MLD other querier present timer is calculated by using the following formula:
[ MLD general query interval ] × [ MLD querier's robustness variable ] + [ maximum response time for MLD general queries ] / 2.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies an MLD other querier present timer in the range of 1 to 31744 seconds.
Usage guidelines
You can set the MLD other querier present timer for an interface in interface view or globally for all interfaces in MLD view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the MLD other querier present timer to 125 seconds on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] mld other-querier-present-timeout 125
Related commands
other-querier-present-timeout (MLD view)