mld last-listener-query-interval
Use mld last-listener-query-interval to set the MLD last listener query interval on an interface.
Use undo mld last-listener-query-interval to restore the default.
Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an MLD last listener query interval in the range of 1 to 25 seconds.
Usage guidelines
You can set the MLD last listener query interval for an interface in interface view or globally for all interfaces in MLD view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the MLD last listener query interval to 6 seconds on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] mld last-listener-query-interval 6
Related commands
last-listener-query-interval (MLD view)