display mld ssm-mapping
Use display mld ssm-mapping to display MLD SSM mappings.
Syntax
display mld [ vpn-instance vpn-instance-name ] ssm-mapping ipv6-group-address
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays MLD SSM mappings on the public network.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this argument is FFxy::/16 (excluding FFx1::/16 and FFx2::/16), where "x" and "y" represent any hexadecimal numbers in the range of 0 to F.
Examples
# Display MLD SSM mappings for IPv6 multicast group FF3E::101 on the public network.
<Sysname> display mld ssm-mapping ff3e::101 Group: FF3E::101 Source list: 1::1 1::2 10::1 100::10
Table 116: Command output
Field | Description |
---|---|
Group | IPv6 multicast group address. |
Source list | List of IPv6 multicast source addresses. |