ipv6 multicast routing

Use ipv6 multicast routing to enable IPv6 multicast routing and enter IPv6 MRIB view.

Use undo ipv6 multicast routing to disable IPv6 multicast routing.

Syntax

ipv6 multicast routing [ vpn-instance vpn-instance-name ]

undo ipv6 multicast routing [ vpn-instance vpn-instance-name ]

Default

IPv6 multicast routing is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command enables IPv6 multicast routing on the public network.

Usage guidelines

Other Layer 3 IPv6 multicast commands take effect only when IPv6 multicast routing is enabled on the public network or for the VPN instance to which the device belongs.

The device does not forward any IPv6 multicast packets before IPv6 multicast routing is enabled.

Examples

# Enable IPv6 multicast routing on the public network, and enter IPv6 MRIB view.

<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6]

# Enable IPv6 multicast routing for VPN instance mvpn, and enter IPv6 MRIB view.

<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-instance mvpn
[Sysname-mrib6-mvpn]