display ipv6 multicast forwarding df-info
Use display ipv6 multicast forwarding df-info to display DF information.
Syntax
In standalone mode:
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ ipv6-rp-address ] [ verbose ] [ slot slot-number ]
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ ipv6-rp-address ] [ verbose ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays information about DFs on the public network.
ipv6-rp-address: Specifies an IPv6 BIDIR-PIM RP by its IPv6 address.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief information about DFs.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays DF information for the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays DF information for the global active MPU.
Usage guidelines
In an IPv6 BIDIR-PIM domain, only the DF on each subnet can forward IPv6 multicast data destined for an IPv6 multicast group toward the RP of the group. For more information about DFs, see IP Multicast Configuration Guide.
Examples
# Display brief information about DFs on the public network.
<Sysname> display ipv6 multicast forwarding df-info Total 1 RPs, 1 matched 00001. RP address: 7:11::1 Flags: 0x0 Uptime: 01:46:40 RPF interface: Vlan-interface1 List of 1 DF interfaces: 1: Vlan-interface2
# Display detailed information about DFs on the public network.
<Sysname> display ipv6 multicast forwarding df-info verbose Total 1 RPs, 1 matched 00001. RP address: 7:11::1 MID: 2, Flags: 0x0 Uptime: 00:03:53 Product information: 0x7a2f762f, 0x718fee9f, 0x4b82f137, 0x71c32184 RPF interface: Vlan-interface1 Product information: 0xa567d6fc, 0xadeb03e3 Tunnel information: 0xdfb107d4, 0x7aa5d510 List of 1 DF interfaces: 1: Vlan-interface2 Product information: 0xa986152b, 0xb74a9a2f Tunnel information: 0x297ca208, 0x76985b89
Table 102: Command output
Field | Description |
---|---|
Total 1 RPs, 1 matched | Total number of RPs, and the total number of matching RPs. |
00001 | Sequence number of the entry to which the RP is designated. |
RP address | IPv6 address of the RP. |
MID | ID of the entry to which the RP is designated. Each entry to which the RP is designated has a unique MID. |
Flags | Entry flag. This field displays one flag or the sum of multiple flags. In this example, the value 0x0 means that the entry has only one flag 0x0. The following flags are available for an entry:
|
Uptime | Length of time for which the entry has been up. |
RPF interface | RPF interface to the RP. |
List of 1 DF interfaces | DF interface list. |