mld-snooping query-interval
Use mld-snooping query-interval to set the MLD general query interval for a VLAN.
Use undo mld-snooping query-interval to restore the default.
Syntax
mld-snooping query-interval interval
undo mld-snooping query-interval
Default
The MLD general query interval is 125 seconds.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an MLD general query interval, in the range of 2 to 31744 seconds.
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command for the VLAN.
To avoid mistakenly deleting IPv6 multicast group members, set the MLD general query interval to be greater than the maximum response time for MLD general queries.
Examples
# In VLAN 2, enable MLD snooping, and set the MLD general query interval to 20 seconds.
<Sysname> system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping query-interval 20
Related commands
enable (MLD-snooping view)
max-response-time
mld-snooping enable
mld-snooping max-response-time
mld-snooping querier