mld-snooping max-response-time
Use mld-snooping max-response-time to set the maximum response time for MLD general queries in a VLAN.
Use undo mld-snooping max-response-time to restore the default.
Syntax
mld-snooping max-response-time seconds
undo mld-snooping max-response-time
Default
The maximum response time for MLD general queries is 10 seconds.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Specifies the maximum response time for MLD general queries, in the range of 1 to 3174 seconds.
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command.
You can set the time for a VLAN in VLAN view or globally for all VLANs in MLD-snooping view. For a VLAN, the VLAN-specific configuration takes priority over the global configuration.
To avoid mistakenly deleting IPv6 multicast group members, set the maximum response time for MLD general queries to be less than the MLD general query interval.
Examples
# In VLAN 2, enable MLD snooping, and set the maximum response time for MLD general queries to 5 seconds.
<Sysname> system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping max-response-time 5
Related commands
enable (MLD-snooping view)
max-response-time (MLD-snooping view)
mld-snooping enable
mld-snooping query-interval