enable (MLD-snooping view)
Use enable to enable MLD snooping for VLANs.
Use undo enable to disable MLD snooping for VLANs.
Syntax
enable vlan vlan-list
undo enable vlan vlan-list
Default
The MLD snooping status in a VLAN is consistent with the global MLD snooping status.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to 4094.
Usage guidelines
You must enable the MLD snooping feature by using the mld-snooping command before you enable MLD snooping for VLANs.
You can enable MLD snooping for multiple VLANs by using this command in MLD-snooping view or for a VLAN by using the mld-snooping enable command in VLAN view. The configuration in VLAN view has the same priority as the configuration in MLD-snooping view, and the most recent configuration takes effect.
Examples
# Enable the MLD snooping feature, and then enable MLD snooping for VLAN 2 through VLAN 10.
<Sysname> system-view [Sysname] mld-snooping [Sysname-mld-snooping] enable vlan 2 to 10
Related commands
mld-snooping
mld-snooping enable