dscp

Use dscp to set the DSCP value for outgoing data-group switchover packets.

Use undo dscp to restore the default.

Syntax

dscp dscp-value

undo dscp

Default

The DSCP value is 48 for outgoing data-group switchover packets.

Views

MVPN view

Predefined user roles

network-admin

mdc-admin

Parameters

dscp-value: Specifies a DSCP value in the range of 0 to 63.

Usage guidelines

The DSCP value determines the packet transmission priority. A greater DSCP value represents a higher priority.

This command is available only for an MDT-based MVPN.

Examples

# Set the DSCP value to 63 for outgoing data-group switchover packets.

<Sysname> system-view
[Sysname] multicast-vpn vpn-instance mvpn mode mdt
[Sysname-mvpn-mvpn] dscp 63