display multicast-mvpn ipv6 default-group
Use display multicast-mvpn ipv6 default-group to display information about default-groups for IPv6 multicast transmission.
Syntax
display multicast-mvpn [ vpn-instance vpn-instance-name ] ipv6 default-group { local | remote }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays information about default-groups of all VPN instances for IPv6 multicast transmission.
local: Specifies local default-groups for IPv6 multicast transmission.
remote: Specifies remote default-groups for IPv6 multicast transmission.
Examples
# Display information about the local default-group for IPv6 multicast transmission in each VPN instance.
<Sysname> display multicast-mvpn ipv6 default-group local MVPN local default-group information: Group address Source address Interface VPN instance 239.1.1.1 1.1.1.1 MTunnel0 mvpna 239.2.1.1 1.1.1.1 MTunnel1 mvpnb 239.3.1.1 -- MTunnel2 mvpnc
# Display information about the remote default-group for IPv6 multicast transmission in each VPN instance.
<Sysname> display multicast-mvpn ipv6 default-group remote MVPN remote default-group information: Group address Source address Next hop VPN instance 239.1.1.1 1.2.0.1 1.2.0.1 a 239.1.1.1 1.2.0.2 1.2.0.2 a 239.1.1.1 1.2.0.3 1.2.0.3 a 239.1.1.2 1.2.0.1 1.2.0.1 b 239.1.1.2 1.2.0.2 1.2.0.2 b 239.1.1.3 1.2.0.1 1.2.0.1 -
Table 78: Command output
Field | Description |
---|---|
Group address | IP address of the default-group for IPv6 multicast transmission. |
Source address | IP address of the MVPN source interface, which is used by the MTI as the source address to encapsulate IPv6 multicast packets of the VPN instance. |
Interface | MTI interface. |
Next hop | IP address of the next hop. |
VPN instance | VPN instance to which the default-group belongs. |