peer
Use peer to specify an MSDP peer.
Use undo peer to remove an MSDP peer.
Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
Default
No MSDP peers exist.
Views
MSDP view
Predefined user roles
network-admin
mdc-admin
Parameters
peer-address: Specifies an MSDP peer by its IP address.
connect-interface interface-type interface-number: Specifies an interface by its type and number. The local device uses the primary IP address of the specified interface to establish a TCP connection with the remote MSDP peer.
Usage guidelines
You must execute this command before you use any other peer commands.
Examples
# Specify the router with IP address 125.10.7.6 as an MSDP peer and VLAN-interface 100 as the local connection port on the public network.
<Sysname> system-view [Sysname] msdp [Sysname-msdp] peer 125.10.7.6 connect-interface vlan-interface 100