msdp
Use msdp to enable MSDP and enter MSDP view.
Use undo msdp to disable MSDP and delete the configurations in MSDP view.
Syntax
msdp [ vpn-instance vpn-instance-name ]
undo msdp [ vpn-instance vpn-instance-name ]
Default
MSDP is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command applies to the public network.
Usage guidelines
This command takes effect only when IP multicast routing is enabled on the public network or for the VPN instance to which the device belongs.
Examples
# Enable IP multicast routing on the public network. Then, enable MSDP on the public network and enter MSDP view.
<Sysname> system-view [Sysname] multicast routing [Sysname-mrib] quit [Sysname] msdp [Sysname-msdp]
Related commands
multicast routing