timer hello (PIM view)
Use timer hello to set the hello interval globally.
Use undo timer hello to restore the default.
Syntax
timer hello interval
undo timer hello
Default
The hello interval is 30 seconds.
Views
PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies a hello interval in the range of 0 to 18000 seconds. If you set the value to 0 seconds, the device does not send hello messages.
Usage guidelines
You can set the hello interval globally for all interfaces in PIM view or for an interface in interface view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the global hello interval to 40 seconds on the public network.
<Sysname> system-view [Sysname] pim [Sysname-pim] timer hello 40
Related commands
pim timer hello