pim timer hello
Use pim timer hello to set the hello interval on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
The hello interval is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies a hello interval in the range of 0 to 18000 seconds. If you set the value to 0 seconds, the interface does not send hello messages.
Usage guidelines
You can set the hello interval for an interface in interface view or globally for all interfaces in PIM view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the hello interval to 40 seconds on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] pim timer hello 40
Related commands
timer hello (PIM view)