igmp last-member-query-count
Use igmp last-member-query-count to set the IGMP last member query count on an interface.
Use undo igmp last-member-query-count to restore the default.
Syntax
igmp last-member-query-count count
undo igmp last-member-query-count
Default
The IGMP last member query count equals the IGMP querier's robustness variable.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
count: Specifies an IGMP last member query count in the range of 1 to 255.
Usage guidelines
You can set the IGMP last member query count for an interface in interface view or globally for all interfaces in IGMP view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the IGMP last member query count to 6 on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] igmp last-member-query-count 6
Related commands
last-member-query-count (IGMP view)