igmp-snooping router-aging-time
Use igmp-snooping router-aging-time to set the aging timer for dynamic router ports in a VLAN or VSI.
Use undo igmp-snooping router-aging-time to restore the default.
Syntax
igmp-snooping router-aging-time seconds
undo igmp-snooping router-aging-time
Default
The aging timer for dynamic router ports is 260 seconds.
Views
VLAN view
VSI view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Specifies an aging timer for dynamic router ports, in the range of 1 to 8097894 seconds.
Usage guidelines
You must enable IGMP snooping for a VLAN or VSI before you execute this command.
You can set the timer for a VLAN in VLAN view, for a VSI in VSI view, or globally for all VLANs and VSIs in IGMP-snooping view. For a VLAN, the VLAN-specific configuration takes priority over the global configuration. For a VSI, the VSI-specific configuration takes priority over the global configuration.
Examples
# In VLAN 2, enable IGMP snooping, and set the aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping router-aging-time 100
# In VSI aaa, enable IGMP snooping, and set the aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vsi aaa [Sysname-vsi-aaa] igmp-snooping enable [Sysname-vsi-aaa] igmp-snooping router-aging-time 100
Related commands
enable (IGMP-snooping view)
igmp-snooping enable
router-aging-time (IGMP-snooping view)