igmp-snooping general-query source-ip
Use igmp-snooping general-query source-ip to configure the source IP address for IGMP general queries.
Use undo igmp-snooping general-query source-ip to restore the default.
Syntax
igmp-snooping general-query source-ip ip-address
undo igmp-snooping general-query source-ip
Default
In a VLAN, the source IP address of IGMP general queries is the IP address of the current VLAN interface. If the current VLAN interface does not have an IP address, the source IP address is 0.0.0.0.
In a VSI, the source IP address of IGMP general queries is the IP address of the gateway interface for the VSI. If the gateway interface does not have an interface, the source IP address is 0.0.0.0.
Views
VLAN view
VSI view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the source IP address for IGMP general queries.
Usage guidelines
You must enable IGMP snooping for a VLAN or VSI before you execute this command.
Examples
# In VLAN 2, enable IGMP snooping, and specify 10.1.1.1 as the source IP address of IGMP general queries.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping general-query source-ip 10.1.1.1
# In VSI aaa, enable IGMP snooping, and specify 10.1.1.1 as the source IP address of IGMP general queries.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vsi aaa [Sysname-vsi-aaa] igmp-snooping enable [Sysname-vsi-aaa] igmp-snooping general-query source-ip 10.1.1.1
Related commands
enable (IGMP-snooping view)
igmp-snooping enable