[x]

Configuring Monitor Link > Configuring the uplink interface threshold for triggering monitor link group state switchover

 

 Next

Configuring the uplink interface threshold for triggering monitor link group state switchover

  1. Enter system view.

    system-view

  2. Enter monitor link group view.

    monitor-link group group-id

  3. Configure the uplink interface threshold for triggering monitor link group state switchover.

    uplink up-port-threshold number-of-port

    By default, the uplink interface threshold for triggering monitor link group state switchover is 1.

prev

 

up

 next

Configuring monitor link group member interfaces in interface view 

home

 Configuring the switchover delay for the downlink interfaces in a monitor link group

© Copyright 2018 Hewlett Packard Enterprise Development LP