Associating a ring with a subring
About associating a ring with a subring
On a multi-ring network, perform this task if you want to advertise topology changes in a subring to a ring.
Restrictions and guidelines
Perform this task on the interconnection node on an ERPS ring.
Procedure
Enter system view.
system-view
Enter ERPS ring view.
erps ring ring-id
Configure the ERPS ring as a subring.
ring-type sub-ring
By default, an ERPS ring is a major ring.
Enter ERPS instance view.
instance instance-id
Associate a ring with the subring.
sub-ring connect ring ring-id instance instance-id
By default, a subring is not associated with any rings.