Configuring R-APS packet levels

Perform this task on all nodes on an ERPS ring.

On a ring, the levels of R-APS packets must be the same for all nodes in an ERPS instance.

A node does not process R-APS packets whose levels are greater than the level of R-APS packets sent by the node.

1. Enter system view.

   system-view

2. Enter ERPS ring view.

   erps ring ring-id

3. Enter ERPS instance view.

   instance instance-id

4. Configure the R-APS packet level.

   r-aps level level-value

   By default, the level for R-APS packets is 7.