Configuring protected VLANs
Restrictions and guidelines
Perform this task on all nodes on an ERPS ring.
Configure the same protected VLAN for all nodes of an ERPS instance. To implement load balancing, configure different protected VLANs for different ERPS instances.
Prerequisites
Before you configure protected VLANs, you must configure an MST region and the VLAN-to-instance mapping table. For more information about MST regions, see spanning tree configuration in Layer 2—LAN Switching Configuration Guide.
Procedure
Enter system view.
system-view
Enter ERPS ring view.
erps ring ring-id
Enable ERPS instance view.
instance instance-id
Configure the protected VLANs.
protected-vlan reference-instance instance-id-list