Activating an RRPP domain
Restrictions and guidelines
Perform this task on all nodes in the RRPP domain.
Before you activate an RRPP domain on the current device, enable the RRPP protocol and RRPP rings for the RRPP domain on the current device.
Before you enable subrings on a device, you must enable the primary ring. Before you disable the primary ring on the device, you must disable all subrings. Otherwise, the system displays error prompts.
To prevent Hello packets of subrings from being looped on the primary ring, enable the primary ring on its master node first. Then enable the subrings on their respective master nodes.
Procedure
Enter system view.
system-view
Enable RRPP.
rrpp enable
By default, RRPP is disabled.
Enter RRPP domain view.
rrpp domain domain-id
Enable the specified RRPP ring.
ring ring-id enable
By default, an RRPP ring is disabled.