Prerequisites for CFD
For CFD to work correctly, design the network by performing the following tasks:
Grade the MDs in the entire network, and define the boundary of each MD.
Assign a name for each MD. Make sure the devices in the same MD use the same MD name.
Define the MA in each MD according to the VLAN you want to monitor.
Assign a name for each MA. Make sure that the devices in the same MA in the same MD use the same MA name.
Determine the MEP list of each MA in each MD. Make sure devices in the same MA maintain the same MEP list.
At the edges of MD and MA, MEPs must be designed at the device port. MIPs can be designed on devices or ports that are not at the edges.