[x]

Troubleshooting MLD snooping > Layer 2 multicast forwarding cannot function

 

 Next

Layer 2 multicast forwarding cannot function

Symptom

Layer 2 multicast forwarding cannot function through MLD snooping.

Solution

To resolve the problem:

  1. Use the display mld-snooping command to display MLD snooping status.

  2. If MLD snooping is not enabled, use the mld-snooping command in system view to enable MLD snooping globally. Then, use the mld-snooping enable command in VLAN view to enable MLD snooping for the VLAN.

  3. If MLD snooping is enabled globally but not enabled for the VLAN, use the mld-snooping enable command in VLAN view to enable MLD snooping for the VLAN.

  4. If the problem persists, contact Hewlett Packard Enterprise Support.

prev

 

up

 next

Troubleshooting MLD snooping 

home

 IPv6 multicast group policy does not work

© Copyright 2016, 2018 Hewlett Packard Enterprise Development LP