[x]

Configuring MLD snooping policies > Enabling MLD report suppression

 

 Next

Enabling MLD report suppression

This feature enables the switch to forward only the first MLD report for an IPv6 multicast group to its directly connected Layer 3 device. Other reports for the same group within the same query interval are discarded.

To enable MLD report suppression:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter MLD-snooping view.

mld-snooping

N/A

3. Enable MLD report suppression.

report-aggregation

By default, MLD report suppression is enabled.

prev

 

up

 next

Enabling dropping unknown IPv6 multicast data 

home

 Setting the maximum number of IPv6 multicast groups on a port

© Copyright 2016, 2018 Hewlett Packard Enterprise Development LP