No exchange of locally registered (S, G) entries between RPs
Symptom
RPs fail to exchange their locally registered (S, G) entries with one another in the Anycast RP application.
Solution
To resolve the problem:
Use the display ip routing-table command to verify that the unicast route between the routers is reachable.
Verify that a unicast route is available between the two routers that will establish an MSDP peering relationship.
Verify the configuration of the originating-rp command. In the Anycast RP application environment, use the originating-rp command to configure the RP address in the SA messages, which must be the local interface address.
Verify that the C-BSR address is different from the Anycast RP address.
If the problem persists, contact Hewlett Packard Enterprise Support.