Configuring a static RPF peer
Configuring static RPF peers can avoid RPF check for SA messages.
If only one MSDP peer is configured on a router, this MSDP peer acts as a static RPF peer.
To configure a static RPF peer:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter MSDP view. | msdp [ vpn-instance vpn-instance-name ] | N/A |
3. Configure a static RPF peer. | static-rpf-peer peer-address [ rp-policy ip-prefix-name ] | By default, static RPF peers are not configured. |