Layer 2 multicast forwarding cannot function

Symptom

Layer 2 multicast forwarding cannot function on the switch.

Solution

To resolve the problem:

  1. Use the display igmp-snooping command to display IGMP snooping status.

  2. If IGMP snooping is not enabled, use the igmp-snooping command in system view to enable IGMP snooping globally. Then, use the igmp-snooping enable command in VLAN view to enable IGMP snooping for the VLAN.

  3. If IGMP snooping is enabled globally but not enabled for the VLAN, use the igmp-snooping enable command in VLAN view to enable IGMP snooping for the VLAN.

  4. If the problem persists, contact Hewlett Packard Enterprise Support.