system-id
Use system-id to configure the system ID for an RB.
Use undo system-id to restore the default.
Syntax
system-id system-id
undo system-id
Defaults
An RB automatically generates a system ID according to its MAC address.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
system-id: Specifies the system ID for an RB in the format of xxxx.xxxx.xxxx, where each x is an hexadecimal number.
Usage guidelines
If you set a new different system ID for an RB, the system resets the TRILL process.
Examples
# Configure the system ID as 1010.1020.1030 for the RB.
<Sysname> system-view [Sysname] trill [Sysname-trill] system-id 1010.1020.1030