set-overload
Use set-overload to set the Overload bit of LSPs and set the lifetime of the set Overload bit.
Use undo set-overload to clear the Overload bit.
Syntax
set-overload [ timeout ]
undo set-overload
Defaults
The Overload bit of an LSP is not set.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
timeout: Specifies the lifetime of the set Overload bit. The value range for this argument is 5 to 3600 seconds. By default, the lifetime of the set Overload bit is infinite, which means that the Overload bit continues being set until it is cleared.
Usage guidelines
Do not configure the command on the root bridge of a TRILL distribution tree. Otherwise, the traffic to be forwarded through the RB cannot be forwarded.
Examples
# Set the Overload bit of LSPs and set the lifetime of the set Overload bit to 1200 seconds.
<Sysname> system-view [Sysname] trill [Sysname-trill] set-overload 1200