apply tag

Use apply tag to set a specified tag for RIP, OSPF, or IS-IS routing information.

Use undo apply tag to restore the default.

Syntax

apply tag value

undo apply tag

Default

No routing tag is set for RIP, OSPF, or IS-IS routing information.

Views

Routing policy node view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the tag value in the range of 0 to 4294967295.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set a tag of 100.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply tag 100