apply mpls-label

Use apply mpls-label to set MPLS labels for routing information.

Use undo apply mpls-label to restore the default.

Syntax

apply mpls-label

undo apply mpls-label

Default

No MPLS label is set for routing information.

Views

Routing policy node view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

If this command fails to assign an MPLS label to a route, the route will not be advertised.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set MPLS labels for routes.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply mpls-label