default-cost (OSPFv3 area view)

Use default-cost to configure a cost for the default route advertised to the stub area.

Use undo default-cost to restore the default.

Syntax

default-cost cost

undo default-cost

Default

The cost is 1.

Views

OSPFv3 area view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies a cost for the default route advertised to the stub area, in the range of 0 to 16777214.

Usage guidelines

This command takes effect only on the ABR of a stub area.

Examples

# Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area as 60.

<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] stub
[Sysname-ospfv3-1-area-0.0.0.1] default-cost 60

Related commands

stub (OSPFv3 area view)