ripng

Use ripng to create a RIPng process and enter RIPng view.

Use undo ripng to disable a RIPng process.

Syntax

ripng [ process-id ] [ vpn-instance vpn-instance-name ]

undo ripng [ process-id ]

Default

No RIPng process is enabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

process-id: Specifies a RIPng process by its ID in the range of 1 to 65535. The default value is 1.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the RIPng process runs on the public network.

Usage guidelines

Before you configure global RIPng parameters, you must create a RIPng process. This restriction does not apply to configuring interface RIPng parameters.

If you disable a RIPng process, the configured RIPng parameters become invalid.

Examples

# Create RIPng process 100 and enter its view.

<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100]