reflect between-clients

Use reflect between-clients to enable route reflection between clients.

Use undo reflect between-clients to disable this function.

Syntax

reflect between-clients

undo reflect between-clients

Default

Route reflection between clients is enabled.

Views

BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP VPNv4 address family view, BGP IPv6 unicast address family view, BGP VPNv6 address family view, BGP L2VPN address family view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

When a route reflector is configured, and the clients of a route reflector are fully meshed, route reflection is unnecessary because it consumes more bandwidth resources. You can use the undo reflect between-clients command to disable route reflection instead of modifying network configuration or changing network topology.

After route reflection is disabled between clients, routes can still be reflected between a client and a non-client.

Examples

# In BGP IPv4 unicast address family view, disable route reflection between clients.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv4 unicast
[Sysname-bgp-ipv4] undo reflect between-clients

# In BGP VPNv4 address family view, disable route reflection between clients.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family vpnv4
[Sysname-bgp-vpnv4] undo reflect between-clients

# In BGP-VPN IPv4 unicast address family view, disable route reflection between clients.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv4 unicast
[Sysname-bgp-ipv4-vpn1] undo reflect between-clients

# In BGP IPv6 unicast address family view, disable route reflection between clients.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv6 unicast
[Sysname-bgp-ipv6] undo reflect between-clients

# In BGP L2VPN address family view, disable L2VPN information reflection between clients.

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family l2vpn 
[Sysname-bgp-l2vpn] undo reflect between-clients

Related commands

peer reflect-client

reflector cluster-id