display bgp dampening parameter ipv4 unicast
Use display bgp dampening parameter ipv4 unicast to display BGP IPv4 unicast route dampening parameters.
Syntax
display bgp dampening parameter ipv4 [ unicast ] [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN instance is specified, the command displays BGP IPv4 unicast route dampening parameters for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display BGP IPv4 unicast route dampening parameters for the public network.
<Sysname> display bgp dampening parameter ipv4 Maximum suppression time (in seconds) : 3973 Ceiling value : 16000 Reuse value : 750 Half-life time for reachable routes (in seconds) : 900 Half-life time for unreachable routes (in seconds) : 900 Suppression threshold : 2000
Table 67: Command output
Field | Description |
|---|---|
Maximum suppression time | Maximum time (in seconds) for the penalty value to decrease from the ceiling value to the reuse value. |
Ceiling value | Penalty ceiling value. |
Reuse value | Reuse threshold. |
Related commands
dampening