rip

Use rip to enable RIP and enter RIP view.

Use undo rip to disable RIP.

Syntax

rip [ process-id ] [ vpn-instance vpn-instance-name ]

undo rip [ process-id ]

Default

RIP is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

process-id: Specifies a RIP process by its ID in the range of 1 to 65535. The default is 1.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the RIP process runs on the public network.

Usage guidelines

You must enable a RIP process before configuring global parameters for it. This restriction does not apply to configuring interface parameters.

If you disable a RIP process, the configured interface parameters become invalid.

Examples

# Enable RIP process 1 and enter RIP view.

<Sysname> system-view
[Sysname] rip
[Sysname-rip-1]