vrrp ipv6 dscp

Use vrrp ipv6 dscp to configure a DSCP value for IPv6 VRRP packets.

Use undo vrrp ipv6 dscp to restore the default.

Syntax

vrrp ipv6 dscp dscp-value

undo vrrp ipv6 dscp

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

dscp-value: Specifies a DSCP value for IPv6 VRRP packets, in the range of 0 to 63. The default is 56.

Usage guidelines

The DSCP value identifies the packet priority during transmission. A greater DSCP value means a higher packet priority.

Examples

# Configure the DSCP value for IPv6 VRRP packets as 30.

<Sysname> system-view
[Sysname] vrrp ipv6 dscp 30