vrrp version

Use vrrp version to specify the version of IPv4 VRRP on an interface.

Use undo vrrp version to restore the default.

Syntax

vrrp version version-number

undo vrrp version

Default

VRRPv3 is used.

Views

Interface view

Predefined user roles

network-admin

mdc-admin

Parameters

version-number: Specifies a VRRP version. The version number is 2 or 3, where 2 indicates VRRPv2 (described in RFC 3768), and 3 indicates VRRPv3 (described in RFC 5798).

Usage guidelines

The version of VRRP on all routers in an IPv4 VRRP group must be the same.

Examples

# Specify VRRPv2 to run on VLAN-interface 10.

<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] vrrp version 2