display cfd service-instance

Use display cfd service-instance to display the configuration information of service instance.

Syntax

display cfd service-instance [ instance-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

instance-id: Specifies a service instance ID in the range of 1 to 32767. If this argument is not specified, the configuration information of all service instances is displayed.

Examples

# Display the configuration information of all service instances.

<Sysname> display cfd service-instance
Service instances configured (2 in total):
Service instance 5:
Maintenance domain: md_5
Maintenance domain index: 5
Maintenance association: ma_5
Maintenance association index: 5
Level: 5  VLAN: 5   MIP rule: NONE   CCM interval: 1s   Direction: Inbound
MEP ID: 730  Interface: Ten-GigabitEthernet1/0/1

Service instance 6:
Maintenance domain: (Without ID)
Maintenance domain index: 6
Maintenance association: ma_6
Maintenance association index: 6
Level: 6  VLAN: 6   MIP rule: NONE   CCM interval: 1s   Direction: Outbound
MEP ID: 731  Interface: Ten-GigabitEthernet1/0/2

Table 15: Command output

Field

Description

Service instances are configured.

Number of service instances configured.

Service instance

Service instance ID.

Maintenance domain

MD of the service instances. (If the MD does not have a name, this field displays Without ID.)

Maintenance domain index

Index of the MD to which the service instances belong.

Maintenance association:

MA of the service instances.

Maintenance association index

Index of the MA to which the service instances belong.

Level

MD level.

VLAN

VLAN to which the MA belongs.

MIP rule

MIP generation rules configured on service instance.

CCM interval

Interval to send CCMs.

Direction

Direction of the MEPs configured on the service instance.

MEP ID

ID of MEPs configured on the service instance.

Interface

Interface of the MEP configured on the service instance.