oam mode
Use oam mode to set the Ethernet OAM mode.
Use undo oam mode to restore the default.
Syntax
oam mode { active | passive }
undo oam mode
Default
An Ethernet OAM-enabled Ethernet port operates in the active Ethernet OAM mode.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin
mdc-admin
Parameters
active: Specifies the active Ethernet OAM mode.
passive: Specifies the passive Ethernet OAM mode.
Usage guidelines
To change the Ethernet OAM mode of an Ethernet OAM-enabled Ethernet port, first disable Ethernet OAM on the port.
Examples
# Disable Ethernet OAM on Ten-GigabitEthernet 1/0/1, and then configure Ten-GigabitEthernet 1/0/1 to operate in passive Ethernet OAM mode.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] undo oam enable [Sysname-Ten-GigabitEthernet1/0/1] oam mode passive
Related commands
oam enable