oam errored-frame-seconds window

Use oam errored-frame-seconds window to set the errored frame seconds event detection window.

Use undo oam errored-frame-seconds window to restore the default.

Syntax

oam errored-frame-seconds window window-value

undo oam errored-frame-seconds window

Default

The port uses the global setting.

Views

Layer 2 Ethernet port view, Layer 3 Ethernet port view

Predefined user roles

network-admin

mdc-admin

Parameters

window-value: Specifies the errored frame seconds event detection window in the range of 100 to 9000 and in steps of 10 (in 100 milliseconds).

Usage guidelines

The value of the errored frame seconds event triggering threshold cannot be greater than the value of the errored frame seconds event detection window (in seconds). Otherwise, errored frame seconds events cannot be generated.

The configuration in port view takes effect on the specified port. For a port, the configuration in port view takes precedence.

Examples

# Set the errored frame seconds event detection window to 10000 milliseconds.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam errored-frame-seconds window 100

Related commands

• display oam configuration

• display oam link-event

• oam errored-frame-seconds threshold

• oam errored-frame-seconds period