Configuring IPv6 local PBR
Configure IPv6 PBR by applying a policy locally. IPv6 PBR uses the policy to guide the forwarding of locally generated packets. The specified policy must already exist. Otherwise, the IPv6 local PBR configuration fails.
You can apply only one policy locally. Before you apply a new policy, you must first remove the current policy.
Do not configure IPv6 local PBR unless required.
To configure IPv6 local PBR:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Apply a policy locally. | ipv6 local policy-based-route policy-name | By default, no policy is locally applied. |