Configuring match criteria for an IPv6 node
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IPv6 policy node view. | ipv6 policy-based-route policy-name [ deny | permit ] node node-number | N/A |
3. Configure an ACL match criterion. | if-match acl { acl6-number | name acl6-name } | By default, no ACL match criterion is configured. |
![]() | NOTE: If an ACL match criterion is defined, packets are matched against the ACL rules, and the permit or deny action and the time range of the specified ACL are ignored. If the specified ACL does not exist, no packet is matched. | |